2017

 

Dragon Series Pumps

Ideally suited for Koi Ponds, Aquaculture, Waterscapes and Aquariums Leaf trap with easy open cam lock lid included! Unions included! ™. 3 year limited warranty on motor. Space clearance between leaf trap and housing are optimized to reduce restriction for the best flow rate.

Split Motor capacitor for more air flow and with bigger fan to keep motor cooler.

Additional swing seal to repel water from the motor.

Enclosed bearing to minimize water damage in case of flooding.

 

Dragon Series

Item # Description GPH @ Head Weight Max. Watts @ 115v Price
0302 Dragon Series 1/4 HP 5,940 GPH / 3.40 ft. Head 51 lbs. 320 Watts / 2.9 Amps @ 115 Volts $829.00
0303 Dragon Series 1/3 HP 6,426 GPH / 3.80 ft. Head 51 lbs 456 Watts / 4.3 Amps @ 115 Volts $849.00
0304 *NEW MOTOR MORE EFFICIENT* Dragon Series 1/2 HP= 3/4 HP 7,770 GPH / 4.93 ft. Head 61 lbs. 600 Watts / 6.2 Amps @ 115 Volts $899.00
 

 

 

These prices from our 2011 catalog. Pump prices using Baldor Motor.

W. Lim Products cares about its customers. We have been maintaining our prices low. Our current pump prices are even LOWER than our 2011 catalog.

If you have a copy of our catalog you can verify that the information is true by looking at page 14.

 

       

0302
Dragon 1/4 HP

   

0303
Dragon 1/3 HP

   
0304
Dragon 1/2 HP
   

 

Dragon Series Max Flow Pumps *NEW Dragon 115V/208V/230V Commercial & Industrial Grade*

Item # Description GPH @ Head Weight Max. Watts @ 115v Price
0305 Dragon Series 1.0 HP (Max Flow) 9,972 GPH @ 3.46 ft. Head 75 lbs. 993 Watts / 8.7 Amps @ 115 Volts $1119.00
0306 Dragon Series 1.5 HP (Max Flow) 11,364 GPH @ 5.78 ft. Head 77 lbs 1256 Watts / 12.6 Amps @ 115 Volts $1279.00
0307 Dragon Series 2.0 HP (Max Flow) 13,992 GPH @ 10.50 ft. Head 77 lbs. 1689 Watts / 18.6 Amps @ 115 Volts $1339.00

Note ׳Ÿ¿½€“1.0, 1.5 & 2 HP Dragon Pumps have 2-1/2׳Ÿ¿½€׳Ÿ¿½ unions for IN and OUT. A 2.5׳Ÿ¿½€׳Ÿ¿½ pipe will give you higher pressure but will slightly decrease the flow. Increasing the pipe to 3׳Ÿ¿½€׳Ÿ¿½ will provide 100% max flow. This will not over amp the motor and will match the performance curve ׳Ÿ¿½€“ shown.

Specifications

  • Industrial Marathon Motor custom built for W.Lim Corp.
  • Worldwide electrical capacity 115V/230V, 50/60Hz, single phase
  • Maximum flow, medium pressure TEFC 1425/1725 RPM
  • True 56 frame motor for cooler running and longer life
  • Custom built 3 phase available (60Hz)
  • Self-priming capability (installing a 1-way check valve will provide better performance)
  • Corrosion resistant epoxy paint
  • Buna seal for salt water use
  • Wet end built with stainless steel screws
  • 3 way discharge position for less restrictions
  • PVC pipe Schedule 40 w/ 2 inch unions on 1/6, ׳Ÿ¿½¼,1/3 & 3/4HP models
  • PVC pipe Schedule 40 w/ 2.5 inch unions on 1.0, 1.5, & 2׳Ÿ¿½€׳Ÿ¿½ models